 |
 |
This service is provided only in Finland.
SGS Fimko offers traceable calibration according to international measurement standards within its accredited competence field (low-frequency quantities) and other fields (outside the competence field and mechanical values). We carry out calibration on the following equipment: multimeters, calibrators, oscilloscopes standard resistances, resistance decades, current shunts, current claws, high-frequency probes, insulation testers and thermometers.
The calibration includes specification of accuracy without setting. If the equipment shall be set according to an agreed specification, it must be agreed upon separately. In these cases the calibration report includes the information before and after setting.
The delivery time is for 3 ½ - 4 ½ digital multimeters approximately three days (15 meters).
Other Calibration
| |
SGS Fimko Also Offers Other Traceable Calibration Services For Instruments Used in Testing:
- Calibration of impact hammers (IEC 60068-2-75)
- Calibration of installation testers calibration of temperature detectors at water’s triple point (0,01°C)
- Capacitance and inductance (100 pF-20 µF, 1µH . . . 1H ) and LCR meters
|
Our Competence Field and Calibration Instruments
We use modern and all-round low-frequency (below 10 MHz) calibration instruments and digital multi-meters HP 34401A (6½-digit), HP 34410A, HP 34970A (6½-digit), HP 34420A (7½-digit) and HP 3458A (8½-digit), calibrators Fluke 5500A (6½-digit) Fluke 5520A (6½-digit )and Datron 4800+4600 (7½-digit), normal resistance 100 µOhm . . . 100 GOhm, voltage transformer Siemens VTO40 (3kV . . . 20kV/100V) and current transformer Siemens AGT 3 (5A . . . 2500A/1A), DC power supplies 0 . . . 20A, 5A . . . 250A and 100A . . . 1000A, 0 . . . 1000V, 100V . . . 7 kV.
Competence field of calibration laboratory (limits of measuring range in parenthesis):
| DC voltage |
0V . . . 1100V |
(0 . . . 40kV)
|
| DC |
1µA . . . 100A |
(1nA . . . 250A . . . 1000A)
|
| Resistance |
0Ohm . . . 1GOhm |
(0Ohm . . . 10TOhm)
|
| AC current |
0V . . . 1100V, 40Hz . . . 50kHz |
(0 . . . 20kV, 0.5Hz . . . 10MHz)
|
| AC |
1mA . . . 100A, 40Hz..1kHz |
(100µA . . . 2500A, 10Hz . . . 20kHz)
|
| Output 1-phase |
50mA . . . 100A, 40V . . . 400V |
(10mV . . . 5000V, 1mA . . . 2500A, 20Hz . . . 20kHz) |
|
